Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
Author Message
555 Offline
Member
***

Posts: 52
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: 18 Apr 2009
Reputation: 0
#11
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
สวัสดีครับ น้านริศ วงษ์เวช ใช่ตัวนี้เลยครับ

แต่ที่หลุดไม่ใช่หลุดตรงจุดที่ชี้ครับ แต่หลุดมาทั้งแผงเลยครับ คือทั้งสะพานสายที่ใช้ร้อยสายผ่านทั้ง 6 เส้นครับ

ขอบคุณมากครับ พอดีได้รับคำแนะนำมาจากน้องท่านนึง ให้ไปที่ร้านช่างมดตรงพญาไทครับ
27-07-2010, 11:11
Find Like Post Reply
555 Offline
Member
***

Posts: 52
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: 18 Apr 2009
Reputation: 0
#12
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
ได้คำตอบ และวิธีซ่อมจาก คุณ Dermot มาแล้วครับ

Hello Warit,

Sorry for the delay, I have just returned from holiday. So sorry to hear that the bridge has come off your guitar.

There are three main reasons for this happening,

1, Humidity. But this is usually only in very dry conditions and I know Bangkok is quite humid.

2, String tension too much. String gauge should be max .012 ? 0.53 on Cedar tops.

3, Case gets knocked with guitar inside and shock wave can cause bridge to come off. Guitar is best carried with string tension off.

4, The bridge was not oiled with fretboard oil. This needs to be done three or four time per year or when you change the strings.

There are probably many other reasons but those are the main four.



So, how to fix your bridge. It would be best if you can find a repair technician in Bangkok who has the tools required to do this job. I am happy to correspond with whoever you choose but here is how to do it.



1, Remove any loose strands of cedar from the underside of the bridge (only the loose strands). You can do this by just lightly rubbing your finger across the wood that is still glued to the underside of the bridge. Do not remove any Cedar that is still stuck to the bridge. Do not use a chisel or any other tools to clean the underside of the bridge.

2, Remove any loose strands of cedar from the guitar top. Do this in the same way as the bridge.

3, The glue used is Titebond 3 http://www.titebond.com/IntroPageTB.ASP?...?prodcat=1 At this point you need some clamping cauls and several clamps, http://www.frets.com/fretspages/Luthier/...28top.html

4, Check that the bridge is fitting back into its original position, once you are happy that it is, apply the glue, then the cauls and then the clamps (see photo). Try to clean all the glue that oozes out. This glue is difficult to remove when dry, so take care to clean all the residue of glue off using a damp cloth. A little sharpened stick can be sued to clean the glue from around the bridge, wrap the damp cloth around the stick. Dry the area with a clean dry cloth, this will show any places where the glue has not been cleaned off, wipe and dry again. Leave clamped for 24 hours. I have attached a photo for you to see the bridge being clamped but there is also another piece of wood inside the guitar as well as on top of the bridge. These are the ?Cauls?.



Your guitar is ready to string up and play again. Remember that it is important to use Fingerboard oil on the bridge and fretboard.



Please let me know when you get it fixed.

Best regards

Dermot

[Image: Oct-Nov09032.jpg]

เพื่อเป็นข้อมูลสำหรับท่านอื่นๆด้วยครับ Smile
29-07-2010, 20:00
Find Like Post Reply
gman Offline
Senior member
****

Posts: 395
Likes Given: 6
Likes Received: 13 in 10 posts
Joined: 29 Aug 2007
Reputation: 6
#13
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
ขอบคุณน้า 555 สำหรับข้อมูลครับ Smile
30-07-2010, 08:41
Find Like Post Reply
555 Offline
Member
***

Posts: 52
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: 18 Apr 2009
Reputation: 0
#14
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
(30-07-2010, 08:41)gman Wrote: ขอบคุณน้า 555 สำหรับข้อมูลครับ Smile

สวัสดีครับ น้าgman มีช่างแนะนำไหมครับ ขอบคุณครับ

ยังไม่ได้เอาไปซ่อมเลยครับ Big Grin
30-07-2010, 20:00
Find Like Post Reply
gman Offline
Senior member
****

Posts: 395
Likes Given: 6
Likes Received: 13 in 10 posts
Joined: 29 Aug 2007
Reputation: 6
#15
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
ช่างมดก็น่าจะทำได้ครับ แต่ผมไม่แน่ใจเรื่องกาวว่าจะมี Titebond 3 เหมือนกับที่ Dermot แนะนำรึเปล่านะครับ
เพราะเท่าที่ผมทราบ ช่างส่วนมากจะใช้ Titebond เหมือนกันแต่เป็น Original wood glue ครับ;
http://www.titebond.com/IntroPageTB.ASP?...?prodcat=1
ซึ่งก็เป็นกาวเคมีที่นิยมใช้กันทั่วไปทั้งช่างไทยและต่างประเทศ คุณสมบัติตอนแห้งแล้วน่าจะแข็งกว่า Titebond 3 ด้วยครับ
ถ้าไม่ซีเรียสว่าจะต้องเหมือนกับที่ Dermot ใช้ Titebond Original ก็ใช้ได้ครับ

ลองโทรปรึกษาช่างมดก่อนก็ได้ครับ Smile
31-07-2010, 13:05
Find Like Post Reply
BENZ Offline
(-1833 Custom Shop-)
******

Posts: 1,499
Likes Given: 62
Likes Received: 52 in 36 posts
Joined: 31 Jan 2009
Reputation: 30
#16
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
เอาไปซ่อมยังครับพี่ Tongue
I haven't got a clue.
01-08-2010, 00:26
Find Like Post Reply
555 Offline
Member
***

Posts: 52
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: 18 Apr 2009
Reputation: 0
#17
RE: สวัสดีครับ กีต้าร์ผมสะพานสายหลุดครับ
(01-08-2010, 00:26)BENZ Wrote: เอาไปซ่อมยังครับพี่ Tongue

นำไปซ่อมแล้วครับ น้องเบนซ์

นำไปซ่อมที่พี่โจน จรัล13ครับ ขอบคุณพี่ๆทุกท่านมากครับ Tongue
10-09-2010, 21:32
Find Like Post Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | NimitGuitar | Return to Top | | Lite (Archive) Mode | RSS Syndication